A1. Installation cost and complexity
A2. Physical size of installed components
A3. Noise
A4. Aesthetics if non-ducted
551–560 of 809 posts
A1. Installation cost and complexity
A2. Physical size of installed components
A3. Noise
A4. Aesthetics if non-ducted
Q. What issues have you had with your existing heat and cooling? A1. Installation cost and complexity A2. Physical size of installed components A3. Noise A4. Aesthetics if non-ducted
Would've loved to see a different approach to the typical refrigerant-split units. I'm EPA certified, and do my own heat pump work, but something that could really blow up the heat pump space would be a closed-loop refrigerant system that uses water lines to the indoor coil/air handler. This would make the system a true DIY self-install, since you'd never be messing with refrigerant loops. The indoor coil/AH could be…
> something that could really blow up the heat pump space would be a closed-loop refrigerant system that uses water lines to the indoor coil/air handler. Add in hot water heating and storage, and that's basically what Harvest Thermal is doing: https://www.harvest-thermal.com/product They even use an off-the-shelf heat pump compressor (SanCO2) that as the name implies, uses CO2 as a refrigerant. It's a pricey compress…
As with solar, energy/heat storage is likely to be an important component of the solution. Even without TOU rates, areas like mine (Mid-Atlantic) can hit temps at night that start to tax heat pumps (low teens F). However, the next day will often be above freezing and sunny. The HP could 'bank' available heat during the day to handle the late-night chill.
Can the wall unit be installed vertically, under a bed, or behind a headboard?
Earlier quoted context omitted.
HA user here as well, having a non-locked down API at minimum (i.e. not actively trying to stop folks using it), through to an open and documented api (would be great), through to open firmware (would be best) and or releasing your own integration for HA would likely get you those kinda customers.
Also, I'm in the market for a new AC/heater - so have been looking. Your specs are in kbtu, but at least for cooling I'm used to tons; I have 2x4.5ton units, and I think that's ~120kbtu, so I wouldn't be able to get just two of your biggest units?
I have family that works as HVAC techs for both residential and commercial. I also used to work at the shop but did other stuff primarily. Here's my question though: it states as a direct to consumer sales route. However the pricing includes installation. I don't know of any contractors that would be willing to do a customer supplied part installation for something like a heat pump. I also know that if they did do it…
Earlier quoted context omitted.
Our walls are good but our windows are a weak point. During summer, the night temperature drops to the low 90’s here. It’s A/C all day, every day, for at least 3 months. Any idea why the HVAC guy and just about every source online insists that A/C can only give you a temperature delta of 20F? I know it can’t be true, but that claim is everywhere.
There's a lot of poor engineering fundamentals among some HVAC salespeople and some websites as well as some sloppy writing. The delta-T that is correctly cited as being "around a max of 20°F" is the delta in temperature across the evaporator (IOW between the return duct and the supply duct [aka the goes-inta and the goes-outta]). It's not the delta-T between the outside air and inside air . With good enough insulati…
Is the market niche esthetics? They do look nice - maybe this company is trying to be the Apple of heat pumps? Charge more because of looks?
This is a serious question - where is the innovation?
Hi Chris, good luck with your startup. I'm in the market for a natural gas --> heat pump remodel and expect to be signing a contractor's proposal today. I'm looking to put in a 4 ton Mitsubishi hyper heat system with an air handler to replace the gas furnace and four minisplits for the cold spots in the house. I live in the PNW. The Mitsubishi remotes and thermostats do indeed look like they're going to be terrible,…
Thanks for the feedback! If you feel ok saying, how much was the quote for this install? Do you place any value in indoor air quality?
Indoor air quality wasn't a factor, no.