Hacker News Board Hacker News, browsed like a classic message board
Live data from Hacker News

Things I would like to 3D print

jmtd.net

Post reply on HN
Print view View original

141–146 of 146 posts

Re: Things I would like to 3D print

#141

Post by svrourke »

ravenstine wrote: post #75
jimnotgym wrote: post #73

Earlier quoted context omitted.

All Good tips, thanks. I think I would get more use out of it if I acquired some basic CAD skills!

If you can code, OpenSCAD might be the best place to start. I have 3D modeling experience, but CAD is sort of a different beast and a skill of its own. Most of the free tools that exist are pretty complicated (FreeCAD makes me want to claw my eyes out) and the professional software packages are outrageously expensive. Once I found OpenSCAD, which is basically just modeling by code, I got way more use out of my 3D pri…

I would like to add onshape has a good free plan (your designs will be public) but it is a great midpoint between tinkercad and full on CAD.

Re: Things I would like to 3D print

#142

Post by crowbahr »

demeyer1 wrote: post #120
crowbahr wrote: post #106

Earlier quoted context omitted.

I've never actually understood the use case for that personally. What do you reverse model search?

It‘a most often used as an auto-complete - of sorts. For example, upload an engine piston and it will find other pistons, then all the engines that the piston will also fit within. Handy for designers and mechanical engineers. But, in the 3D printer use case it is most often used to find similar objects (it does both). For example, upload and a Squid Games mask to print for Halloween and find other Squid Games masks.…

That does make sense.

I've used Thangs before but hadn't really understood the use case for the reverse search. Thanks for the explanation!

Re: Things I would like to 3D print

#143

Post by throwawayyy181 »

mdrzn wrote: post #140
tristor wrote: post #123

Earlier quoted context omitted.

You’re telling this as a funny story, but to an outside observer that sounds horrifyingly dystopian. Someone improperly reported you like they were getting side-pay by the Stasi and four armed government agents showed up at your door to accost you over a personal possession within your own home. Absolutely nuts, and ironically why many people consider personal firearm possession essential to freedom.

agree, from an european POV this story sounds crazy and I would be afraid to even invite random people inside my house for fear of repercussions that I'm unaware of. edit: apparently this didn't happen in the USA?

It sounds like the UK, it’s 100% legal to print guns in the USA

Re: Things I would like to 3D print

#144

Post by svrourke »

ravenstine wrote: post #84
OJFord wrote: post #79

Earlier quoted context omitted.

I would love to use OpenSCAD, just seems to have a really steep learning curve that I can't get up. Even though I write code professionally and have no professional CAD experience, Fusion360 just clicked in a way that OpenSCAD didn't for using my 3D printer (Prusa Mini). I agree about FreeCAD, lacks a lot of polish, but there's a big update coming from it seems basically one maintainer that looks pretty promising. I…

I haven't used Fusion360, but I have to say the screenshots of the UI make it look appealing and pretty straight forward (more so than say Solidworks). My assumption is that it and other standard CAD packages would have a greater learning curve for a programmer who mostly wants to print simple but custom objects. Granted, I have a background in non-CAD 3D, but OpenSCAD was incredibly fast for me to pick up not just b…

I've also a programming background however I got very intimidated by openSCAD though I think that might've just been because I had been using tinkercad for a year an a half beforehand and was just coddled.

Re: Things I would like to 3D print

#145

Post by demeyer1 »

djmips wrote: post #130
demeyer1 wrote: post #3

Good list! Couple thoughts - if you are using some of these items with kids (the replacement part example) it's worth considering the types and materials of the filament you are using. Some are safer than others, depending on the application. If you are using for food storage, there are ways to take otherwise unsafe materials and make them safer for storing edible/consumable materials. If there is something out there…

I appreciate you naming your company Thangs and not co-opting an existing word cough meta cough windows. Thanks from the bottom of my heart.

I love this comment! Thank you for saying that!

Re: Things I would like to 3D print

#146

Post by demeyer1 »

SSilver2k2 wrote: post #127
demeyer1 wrote: post #3

Good list! Couple thoughts - if you are using some of these items with kids (the replacement part example) it's worth considering the types and materials of the filament you are using. Some are safer than others, depending on the application. If you are using for food storage, there are ways to take otherwise unsafe materials and make them safer for storing edible/consumable materials. If there is something out there…

Just wanted to chime in: Starting to become a huge fan of Thangs.com, thanks for being involved!

Appreciate the kind words - if you ever have any feedback, please just send me an email (d@physna.com) and I'll be happy to either jump on a call or take the feedback async by email. We are genuinely trying to build a different type of platform, and we highly prioritize listening to our users. We can't build everything everyone wants immediately, but it's a rare product change we make that isn't aligned to user feedback.
Post reply on HN