Earlier quoted context omitted.
One objective is a Q value of greater than 10 for a moment. And a steady Q value of 5. Source: https://en.wikipedia.org/wiki/ITER#Objectives
Maintain a fusion pulse for up to 8 minutes What does this mean?
ITER: World's largest nuclear fusion project begins assembly
261–270 of 466 posts
Re: ITER: World's largest nuclear fusion project begins assembly
#262The power density of ITER (gross fusion power of the reactor divided by the volume of the reactor, not just the volume of the plasma) is 50 kW/m^3. This is horribly low, about 1/400th the power density of a PWR reactor vessel.
The power/$ is also horribly bad. The cost is going to have to come down by two orders of magnitude to start being competitive.
Fusion is an example of sunk cost thinking. The only reason we're working on it is because we had been. A clean sheet energy strategy would put very little resources into fusion.
Re: ITER: World's largest nuclear fusion project begins assembly
#263Earlier quoted context omitted.
That’s all well and good if you reach stability below a level that is sustainable. We aren’t going to be anywhere near that from an environmental point of view.
And whybdo you believe that? We will never surpass 12 billion by most estimates. Where is the sustainability point?
Re: ITER: World's largest nuclear fusion project begins assembly
#264Earlier quoted context omitted.
I'm also a fusion power fanboy but >nuclear power is the only realistic way to solve the looming energy crisis of the 21st century while still maintaining the same standard of living for everyone This is just not true, there's no way you can say this. Solar costs are going down massively. Hydro is dirt cheap already. So renewables can absolutely be part of an energetic transition in the near future, while fusion is a…
Hydro is actually pretty bad in terms of big safety incidents (Banqiao: 171000 dead, Machchu: 5000 dead, South Fork: 2208 dead) and solar/wind have trouble beating nuclear on metrics like death/watt because you need lots of infrastructure per watt. Picture a few large cities with contractors running around every roof tending to solar panels and compare to a few experts at a single nuclear power plant. For the contrac…
There were some studies claiming nuclear has lower deaths/kWh, but as I recall they (1) used old numbers for wind that do not reflect current safety figures, (2) assumed solar was rooftop instead of utility-scale which is now dominating installations (because it is so much cheaper), and (3) ignored deaths from uranium mining, which is where most of the release of radioactive material is in the fuel cycle.
Re: ITER: World's largest nuclear fusion project begins assembly
#265Earlier quoted context omitted.
I'm also a fusion power fanboy but >nuclear power is the only realistic way to solve the looming energy crisis of the 21st century while still maintaining the same standard of living for everyone This is just not true, there's no way you can say this. Solar costs are going down massively. Hydro is dirt cheap already. So renewables can absolutely be part of an energetic transition in the near future, while fusion is a…
>This is just not true, there's no way you can say this. Solar costs are going down massively. Hydro is dirt cheap already. So renewables can absolutely be part of an energetic transition in the near future, while fusion is at best many decades away. So while I think fusion energy has the potential to transform energy generation, and by extent everything about our life, it's wrong to assume renewables aren't probably…
This is not true. With a properly designed solar/wind/battery/hydrogen system, a steady stream of power can be delivered more cheaply than what you could get from a new nuclear reactor.
This wasn't true even ten years ago, but it's true now, and many (such as yourself) have not updated your priors.
Re: ITER: World's largest nuclear fusion project begins assembly
#266Earlier quoted context omitted.
Important distinction here: nobody actually cares or wants power that is baseload. In some cases it can actually be a bad thing. The property you really want is “dispatchable”. There when you want it. Not when you don’t.
>nobody actually cares or wants power that is baseload. That doesn't make sense. At all hours of the day there is some demand on the grid: https://www.eia.gov/todayinenergy/detail.php?id=42915 If you only have to store for the fluctuations vs. having to store all night you end up with massively less storage. Electric cars won't do it either. There are less than 300 million registered vehicles in the US and a car batt…
Go there and model (with real historical weather data) how much a solar/wind/battery/hydrogen system would cost to deliver steady power. Then compare against new nuclear. Sorry, nuclear.
(The hydrogen part is essential in some places, like northern Europe, and its impact is not fully appreciated by many nuclear fans.)
Re: ITER: World's largest nuclear fusion project begins assembly
#267Earlier quoted context omitted.
Is it really clear the fusion power, even if it's achieved, will actually be cheap enough to use? Sure, the fuel is almost free, but the fuel for solar, wind, and hydroelectric power is also free and that doesn't make them cheap. If we're not worried about cost, we could build enormous batteries using existing technology and use solar and wind to power everything. Fusion has to be cheaper than that, and judging by th…
Well, fusion has the benefit of having much lower operating costs. Violent terminations, quench events, and tritium containment breaches are serious concerns, but a risk assessment of a fusion power plant would give a much cozier feeling than a risk assessment of a fission power plant. The neutron activated materials are safe after a century and there is not much of it. All of the cost in a fusion plant sits on manuf…
Also, the need to replace major reactor components many times over the life of the reactor, due to cumulative neutron damage, will itself cause very large operating costs.
Re: ITER: World's largest nuclear fusion project begins assembly
#268Earlier quoted context omitted.
You could imagine building a globe-spanning power distribution network. Solar panels on one side of the planet could provide power at night on the other side of the planet.
If we could transmit power across vast distances like that then we wouldn't even need to bother with solar. We could build a thousand nuclear power plants in the middle of nowhere. Unfortunately, power transmission suffers from line losses. Even a few hundred miles requires several hundred thousand volts to avoid losses. Maybe that's an easier problem to solve than fusion.
Re: ITER: World's largest nuclear fusion project begins assembly
#269Looking at stories like this, you need to realize how far out of the running this technology is. The power density of ITER (gross fusion power of the reactor divided by the volume of the reactor, not just the volume of the plasma) is 50 kW/m^3. This is horribly low, about 1/400th the power density of a PWR reactor vessel. The power/$ is also horribly bad. The cost is going to have to come down by two orders of magnit…
Re: ITER: World's largest nuclear fusion project begins assembly
#270Sorry I'm a layman at best on the subject, buts whats the difference between this project and, for example, W7-X?
To get fusion there is a couple of ways: There is gravitational confinement (that is how stars do it, but it is impractically large for humans), there is inertial confinement (get enough energy out before it explodes, but that only works for hydrogen bombs and NIF, not for a reactor) and magnetic confinement (that is what we intend to use for reactors). Magnetic confinement works because a plasma consists of charged…