Will be interesting to see the details when the report is actually public. It does sound like the scenario that Mentourpilot explored in the simulator is close to what happened, namely: Bad AoA probe causes MCAS to trim down, and also to indicate IAS disagree. Pilots increase throttle as per non-normal checklist to reduce the risk of stalling due to unreliable airspeed. Pilots disable electric stabilizer trim, as per…
I'm an armchair non-expert at best: but shouldn't planes always be controllable by the column so long as the plane is mechanically OK? I.e. max power + pull stick should always just take the plane up, regardless of any amount of misconfiguration such as being out-of-trim etc? Isn't that a reasonable expectation? That is: a pilot in panic at low altitude should never be required to do anything more than he basically c…
Now, at the same time, the airframe is not rated for aerobatics. So, you don't want to fit a huge elevator, because then it would be too easy to pull high-G maneouvers, and damage the airframe. It's all a compromise - very effective trim is a necessity in a large jet, and the elevator should be just large enough to give the control needed. The limitation then is that there may be parts of the flight envelope where the aircraft can be so far out of trim that the elevator struggles to overcome the trim. Normally well trained pilots would go nowhere near these parts of the flight envelope. This is why it's really not helpful when the automatics go awry, and put you there.