Live data from Hacker News

Samsung Q990D unresponsive after 1020 firmware update

us.community.samsung.com

501–510 of 580 posts

Re: Samsung Q990D unresponsive after 1020 firmware update

#501
post #11

List price $2,000. What was the update supposed to improve/fix?

Isn't that a bit insane for a soundbar? How can those things produce any decent bass without volume?

They come with (shitty) subwoofers (crossover probably something hilarious like 100Hz).

Re: Samsung Q990D unresponsive after 1020 firmware update

#502

Earlier quoted context omitted.

That old truck is probably polluting 10-30× more than a modern one. While corporations have their flaws, they have spent time and money making engines more efficient and reducing harmful emissions.

That old truck will pollute less in its lifetime than the amount of energy it takes to produce a modern automobile, let alone the cumulative energy spent to sustain a consumer base ready to sign a new lease every 36 months for the latest and greatest in aggregated conflict minerals + spyware on wheels, it just does it all over the poors someplace else instead of where you live.

Not true at all: 80% of pollution from an ICE vehicle is from driving it (fuel and servicing).

Re: Samsung Q990D unresponsive after 1020 firmware update

#503

Good motivation for a PSA: This happens more and more often, and there is a fairly easy + popular workaround (which also comes with 99% ad blocking as a bonus). Just either set up pi-hole locally OR use a hosted DNS service that does essentially the same thing. Main idea: Ads, updates, etc. typically (not always) need to resolve hosts before connecting to servers. Simply resolve these hosts to 0.0.0.0 instead of a re…

Even easier: just don't connect it to your network. Everything connected to my network runs free software that I control. If you absolutely must have something on your local network then have it in a VLAN that has no internet access and can't access your main LAN.

Re: Samsung Q990D unresponsive after 1020 firmware update

#504

Earlier quoted context omitted.

Contrary to lots of other opinions here, I bought a 65" Samsung TV at the beginning of covid and I sincerely don't have any significant complaints. The remote is easy to use, launching apps is straightforward, connecting an ARC soundbar was no problem, nor was connecting a Chromecast and an Xbox, and it "just works". Every once in a blue moon (maybe twice a year-ish) I've had to power cycle it to fix a wifi connectiv…

> don't have any significant complaints. Are you happy with it spying on you? That's what all Samsung televisions do, and there is no way to turn it off. They advertise on their own web page that they monitor the content viewed on their televisions for targeted advertising. This isn't via some sort of metadata, they take screenshots at regular intervals and upload them to very insecure hosting. I hope you never look…

Do you have a source for the screenshot thing?

Re: Samsung Q990D unresponsive after 1020 firmware update

#505

If the damage is actually as bad as it sounds, Samsung is probably talking with their lawyers and is being instructed to maintain radio silence so as to better prepare for the class-action lawsuit.

A few years ago, some Samsung TVs such as TU8000, had basically a factory defect. Randomly, after a few months, a "line" appears on the TV.

They knew they should have announced a recall, but they didn't. What they did was... They simply replace the TV panel, even outside the warranty, just to avoid lawsuits (After the person first try to contact them).

Yes, outside the warranty.

But one with one detail: They replace it with the same defective panel.

Unfortunately, I was the lucky one who ended up buying this TV, and I've already replaced the panel about three times in less than five years.

Even the Samsung repair technicians that came to my house to fix the TV already told "The model just have this issue, nothing we can do about it. If it happens again, report it again to fix"

Re: Samsung Q990D unresponsive after 1020 firmware update

#506
post #468

Earlier quoted context omitted.

> Where on earth would I even have to go to find a place without there being any 2.4Ghz signal interference? Unironic answer: most airports. Even small ones will have avionics shops, those avionics shops will have to test Emergency Locator Beacons, and those beacon signals are not meant to escape to the outside world during testing. Thus, most have Faraday rooms, cages, or just small (2-3 cubic feet) boxes to block s…

> Would not recommend working in aviation Why not?

Low pay. High stress. High responsibility. You can't report a lot of health problems(anything mental health will get your license taken away).

Aviation is expensive and shitty. The FAA is a garbage organization that covers it's own ass first.

Re: Samsung Q990D unresponsive after 1020 firmware update

#507

If the damage is actually as bad as it sounds, Samsung is probably talking with their lawyers and is being instructed to maintain radio silence so as to better prepare for the class-action lawsuit.

A few years ago, some Samsung TVs such as TU8000, had basically a factory defect. Randomly, after a few months, a "line" appears on the TV. They knew they should have announced a recall, but they didn't. What they did was... They simply replace the TV panel, even outside the warranty, just to avoid lawsuits (After the person first try to contact them). Yes, outside the warranty. But one with one detail: They replace…

i did something similar with a vodafone phone like 3 times, they just kept giving me the same model again and again.

Re: Samsung Q990D unresponsive after 1020 firmware update

#508
post #491

Earlier quoted context omitted.

I assume you never bought Samsung again. 'Having' (paid for) a device for not having it for weeks is not that customer friendly attitude. It is almost in the same league with how UK furniture makers exploit customers. You get into the shop, see something nice, start ordering it, casually ask about the delivery date, cancelling the whole thing and run to an Ikea after learning that it will take somewhere between 4-6 m…

> I assume you never bought Samsung again. I boycotted Samsung after having similar troubles with their computer screens. Essentially, they chose a weird adapter for the screen that I can't find anywhere making the screen essentially useless. I no longer buy anything Samsung. I can't say the same about other people as Samsung is essentially an Advertising company that happens to have consumer products.

Aren't all such?

Spending furtune on lies, then more on liers to lie about their frequent failures. Instead of spending on honest work and good products. It is petty so few boycott crap and crappy attitudes. And the masses eat up lies happily. So sad.

Re: Samsung Q990D unresponsive after 1020 firmware update

#509

Earlier quoted context omitted.

Why does a soundbar need software? An active speaker with a jack plug would work just fine

Welcome to the world of embedded devices. Sure, you could do everything through a static circuit and require things being fed with speaker wire. But if you add a microcontroller you're going to be able to do much more, get better sound quality, and protect your equipment. Do your speakers have batteries? Do they plug into wall? Either way you can better control power levels. Do you want to boost bass? Fix corrupted s…

>get better sound quality

That just isn't true though, is it? How would a microcontroller add sound quality?

Re: Samsung Q990D unresponsive after 1020 firmware update

#510

Earlier quoted context omitted.

> don't have any significant complaints. Are you happy with it spying on you? That's what all Samsung televisions do, and there is no way to turn it off. They advertise on their own web page that they monitor the content viewed on their televisions for targeted advertising. This isn't via some sort of metadata, they take screenshots at regular intervals and upload them to very insecure hosting. I hope you never look…

Do you have a source for the screenshot thing?

It's called automatic content recognition (ACR). Most systems take low resolution (about 640x480 or 320x240) black and white screenshots at regular intervals, compress them do death, and upload that to big brother. That's more than enough to determine what specific kink or style of porn you're into, if you make the mistake of thinking that watching that kind of stuff in the privacy of your own home is private.

https://www.zdnet.com/home-and-office/home-entertainment/how...

Post reply on HN