351–360 of 464 posts
But you can pry my Palm data cables from my cold, dead hands.
My cable box Protips: 1: use transparent boxes like an 11l IKEA Samla so you can easily see what you have. 2: fold each cable in half or a few times more and apply the granny knot[1], this will prevent your cables becoming an entangles mess. There are superior(tm) ways to fold cables, but doing the granny knot for household cables seems the way to go. Doing festivals with retro gaming computers I’ve done this thousan…
There is a lot of USB cables that look the same but have different capabilities, there is a lot of HDMI or DisplayPort cables that look the same but have different capabilities, there are cables that stop working once you bend them in a particular way.
There are cables that can get sticky and filthy practically on their own (Apple!).
Mind cables whose plugs are bent.
I think the same should apply to perfectly fine screws you take off broken stuff, pieces of metal profiles, nuts etc. But I could never be arsed to sort them proactively. My late father used to keep a Big Jar of Screws and spend time rummage through them when he needed a particular one. I don't know which approach is superior, to be honest.
Earlier quoted context omitted.
Unless you are very short on space, keep all 10. Because 50-100% of them will randomly cease to work.
I dunno, I get few thematical boxes of them (audio cables, power cables, usb stuff) and it never happened
I have decided to not keep many cables. USB thingies, DVIs, VGAs, audio... you can get it from Amazon in pinch with same day delivery and I don't have that much space to spare. But you can pry my Palm data cables from my cold, dead hands.
Key for me is to "group" cables. For example, I have a bag of USB-C cables, a bag of USB-A cables, etc. Grouping them is key to deduplicating. It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them. I a…
There is some unfortunate crossover regarding where things belong because some USB are for power, some are for A/V etc, others or data...
What I realised, when going through these boxes was two things; it would cost a fortune to replace all of the cables in them, I wouldn't be surprised if replacement cost ran into the low thousands of £££ (should they be on my home insurance?!) and secondly; I'm no longer indecisive about what to do with a frayed or otherwise non-ideal cable, it goes straight in the bin; I used to retain the "nicer" ones and solder new connectors if the microUSB had worn out, or the cable was damaged near the end, that got much harder with USB-C unless I'm going for a simple +/-/D+/D-, so I just don't bother.
As for how often they're used; the USB box comes out almost daily, sometimes several times a day, if I'm charging things in my home office, or connecting something that isn't permanently plugged at my desk, I put the cables back away when I'm done. Power comes out every few weeks, and "networking" only when I need to reorganise things in the network cabinet/server rack.
For USB, the "final form" would be to create a labelling system so I can tell at a glance what each one supports, because as it stands I have to pull out my little LED cable tester thing and see how many light up to know if it'll do DP or high power charging etc.
Earlier quoted context omitted.
Somewhat recently, on a wild night out on the town, I ended up buying a USB-C USB-C cable tester[0]. Using it, I managed to find a few amazing cables amongst my collection. Gave away the others with context. I want something like this for every type of cable. [0] https://caberqu.com/20-42-c2c-caberqu.html
I like your idea of a wild night out! Note to others: that tester board looks fairly passive, i.e. I don't see (mention of) a microcontroller to talk to the chip that high-powered cables must have. So I guess it's somewhat limited in the number of things it can check?
Sometimes it even shows USB-C connectors that are only wired for one orientation!
Key for me is to "group" cables. For example, I have a bag of USB-C cables, a bag of USB-A cables, etc. Grouping them is key to deduplicating. It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them. I a…
I don't group exactly, nor do I want to de-duplicate, but I've organised my boxes on the shelf and sorted and labelled them recently, in what seems the most logical way at the time; I have "networking", "USB", "power", "A/V", "PC" and some as of yet unlabelled ones with random stuff I can't place in the others. There is some unfortunate crossover regarding where things belong because some USB are for power, some are…
You can keep it in the same box!
Earlier quoted context omitted.
Somewhat recently, on a wild night out on the town, I ended up buying a USB-C USB-C cable tester[0]. Using it, I managed to find a few amazing cables amongst my collection. Gave away the others with context. I want something like this for every type of cable. [0] https://caberqu.com/20-42-c2c-caberqu.html
What makes for an amazing cable? For USB, if it carries data and power, I’m usually pretty happy with it.
I also have preferences between my cables by the quality and aesthetic, I prefer some over others because they look or feel nicer even if in testing they contain the same conductors, but that's just ... me.
I currently have 3 such cables connected to my work laptop each sending 4K/60Hz video to each of my 3 x 4k monitors, audio to my soundbar and one of them is powering the laptop at 90W and sending my keyboard, mouse and webcam inputs back.