311–320 of 463 posts
The delight of having one of those cables be useful is immeasurable. It doesn't even have to be for your own good. In fact, I bet if we made a site where everyone can catalog their collections and automatically match them up with neighbors that have that cable, people would be more than happy to share cables for free.
Key for me is to "group" cables. For example, I have a bag of USB-C cables, a bag of USB-A cables, etc. Grouping them is key to deduplicating. It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them. I a…
Which of the cables are for PD? How much power? Can they do USB? If yes, at which of the dozen speeds? Is it a Thunderbolt cable? Which TB version? Is it certifiable or just blatantly unstable when running 40Gbit/s? Or is it some proprietary alt mode cable? And which ones are just spec breaking fire hazards if you tried PD with 240W through them? Do the cables have markings to tell you the capabilities? Are they even correct? Were they put on as a lie to upsell cheap USB 2.1 cables?
Bonus points if there are cables with some sort of “adapter” dangling in front (quotes because these are not a thing in USB). Double all your points if there is an USB-C to USB-C extension cord in the box.
It is certainly a box of mysteries.
I do not mean to invalidate your organizational scheme, but every time I am reminded of USB I have an irrational desire to rant about the flaws of USB-C.
Earlier quoted context omitted.
That's an expensive mistake to make, though frying your HDDs is usually a lot cheaper than frying your GPU. It's seriously annoying that this is the case though. Unless you kept the cables in the original package or in a labelled container, you cannot safely use them again if you owned more than one modular PSU.
It wasn't actually very expensive in money, because I was still able to RMA the pair of fried drives, but it did cost me $30 in shipping, a month of waiting, a lost delivery via UPS, and tons of time dealing with customer support for both UPS and Seagate to actually get a second set of replacement drives. On the bright side, the actual replacements that eventually got to me were both 2TB bigger than the originals. Th…
In 2021 I cut the end off a USB cable to expose the power leads which I scotch taped to the power meter on my bike to charge it. I kept that cable. In 2024 I used it to add USB disconnects to the light strip I attached to the bottom of my son's crib, allowing me to keep the light strip intact when we lowered the base from the baby height to the toddler height. A week later we got rid of the strip because we really di…
Earlier quoted context omitted.
What marker do you use to mark them? Is the ink durable and easy to read?
I bought a cheap pack of 5 colors of 3m electrical tape. Each cable gets one or two pieces of tape: Data: White if usb2 Blue if it supports USB 3 data (because 5Gbps USB 3 ports are mostly blue) Green if TB/USB4/40Gbps Power: None if low/no Power Delivery Yellow for 45W PD Red for 65W+ PD
Earlier quoted context omitted.
Remember CD spindles? Those are were a quarter of my cables live now. They can be stacked! There's also a few boxes and one tech bag. Also, the 15m (50ft) HDMI cable doesn't fit anywhere so it got it's own space.
A secret I've found is use hair ties instead of rubber bands with cables, they survive long stints in the garage much better
Whoever does need it, I give you permission to throw out all your old cables, power adapters, and routers. Yes, on the off chance you do decide you need a Palm III dock, Linksys WRT54G, or Sony PSP charger that means you'd have to buy one on Ebay, but you can cross that $10 bridge if it actually happens.
For me, the hardest part is actually figuring out what the cable is called in order to find a replacement.
1. Sort into cable type
2. Keep the shortest and longest of each type
3. Ditch all the others
I still have 6 drawers of cables.
Key for me is to "group" cables. For example, I have a bag of USB-C cables, a bag of USB-A cables, etc. Grouping them is key to deduplicating. It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them. I a…
This doesn't work for everything: audio cables do not evolve much, nor do remote cables for DSLRs; but in general it's reasonably effective.