Hacker News Board Hacker News, browsed like a classic message board
Live data from Hacker News

I also filed the corners off my MacBook

brt.fyi

Post reply on HN
Print view View original

181–190 of 232 posts

Re: I also filed the corners off my MacBook

#181

Post by GuB-42 »

maxbrt wrote: post #158
GuB-42 wrote: post #139

Earlier quoted context omitted.

The first reason is price. Macs are expensive, you may argue that it is worth it but it is still a lot of money. The Macbook Neo change the deal somewhat, really good value, but even with that, it is not the cheapest laptop by far. The second reason is compatibility. Apple does a pretty good job with x86 emulation, but it still a problem for many Windows games, Linux support is not the best either. And then, there ma…

I have to disagree with you on the price. The cheap price was one of the reasons I ended up going with it. It's an M4 Air with 24GB of Memory. I got it for around 950 Euros, and at the time I could not find anything close to it that combined the same amount of processing power, memory, battery and overall built at that price. The compatibility yes I fully agree. This is sort of a trial for me to see how well it works…

It sounds like a pretty good deal, so I assume you got it before prices went crazy, like mid-2025.

At that time, you could get a decent entry-level Windows laptop for around 700 euros that can do pretty much everything you want a laptop for if you are not a power user. More than that and for most people, it is "expensive". At 950 euros, you are paying for options, and it turns out that the package offered by that M4 Air is what you want, but it is likely that a gamer would want a different package for these 950 euros. Personally, I went for a 1000 euro ThinkPad because it was a better fit for my needs at that budget. In particular, I wanted more than the 256 GB of storage you most likely had (1 TB).

Re: I also filed the corners off my MacBook

#182

Post by maxbrt »

hoppp wrote: post #93

You should never use a mac on your lap if you are male because you can burn your balls. You can end up shooting blanks, these laptops can do heat castraton.

That reminds me, I should have mentioned an even more backwards design which is that of the vent placement on my older Thinkpad X1. It has the air intake vents on the bottom, they relied on the little rubber feets to lift it up for correct airflow. I pretty much could not use it on my lap because of that, it got too hot even during smaller tasks. But to be fair, I've noticed similar placement on several HP/Dell laptops (or notebooks?) that I had at work too.

Re: I also filed the corners off my MacBook

#185

Post by tamimio »

rob74 wrote: post #43

Nitpick: those are (sharp) edges, not corners. Maybe the next generation of MacBooks will also actually have exactly 90° non-rounded corners? I guess that's the next logical step... Also, TIL that Bosch also makes files. I was under the impression that they only made powertools (or electronic measuring devices, or other things with a battery or power cord).

It’s not nitpicking, I kept looking at the corners trying to see what was changed, back and forth for few seconds before I realized it was the edges!

Re: I also filed the corners off my MacBook

#186

Post by deadbabe »

maxbrt wrote: post #183
deadbabe wrote: post #120

Anywhere you could take this to have it professionally done? I like the idea but would never do it myself.

Can't name any concrete place but maybe try a local Hackerspace? They often help with that for free and you can give a donation

I would rather pay money.

Re: I also filed the corners off my MacBook

#187

Post by cestith »

GuB-42 wrote: post #139
dmaa wrote: post #87

Earlier quoted context omitted.

I am in neither of these and nor is any of the many people I know with macbooks. I honestly do not understand why any average person would buy anything else than a macbook today.

The first reason is price. Macs are expensive, you may argue that it is worth it but it is still a lot of money. The Macbook Neo change the deal somewhat, really good value, but even with that, it is not the cheapest laptop by far. The second reason is compatibility. Apple does a pretty good job with x86 emulation, but it still a problem for many Windows games, Linux support is not the best either. And then, there ma…

Macs don’t compete with the low end laptops. Even the Neo competes more in the middle of the laptop market. When you compare the specs and real-world performance of a MacBook, Mac Mini, or Mac Studio to other equivalent models the price might be slightly higher but not out of line. Compatibility, lack of upgradeability and the OS choices come into play, but an honest comparison between systems otherwise puts Macs just on the slightly expensive portion of the market.

Re: I also filed the corners off my MacBook

#188

Post by carlosjobim »

jimnotgym wrote: post #77
dmaa wrote: post #29

Great article and happy to see that I'm not alone. I don't get why on such a well thought-out and built device as this, the corners are so sharp. From how I use the trackpad, the bottom of my thumb always feels sore-ish after a day's work and it took me a while to trace this to the sharp cornern of my macbook.

>I don't get why on such a well thought-out and built device as this, the corners are so sharp. Because macs have 3 big markets 1) graphic designers/ photo editors 2) web developers 3) people who value looks above other considerations Number 3 buy more macs, so square corners it is

Those prejudices are I think 20 or at least 15 years obsolete. All kinds of people use Macs today.

Re: I also filed the corners off my MacBook

#189

Post by sgirard »

ssl-3 wrote: post #178
rob74 wrote: post #43

Nitpick: those are (sharp) edges, not corners. Maybe the next generation of MacBooks will also actually have exactly 90° non-rounded corners? I guess that's the next logical step... Also, TIL that Bosch also makes files. I was under the impression that they only made powertools (or electronic measuring devices, or other things with a battery or power cord).

With something like 400,000 employees and 400 locations, Bosch has fingers in all kinds of markets. They invented the O2 sensor that lead to electronic fuel injected engines being awesome, and they still produce huge numbers of OE automotive engine management systems. They've got their self-branded tools, but when you buy a Dremel widget or a Diablo saw blade, you're also buying Bosch. I used to get home aquarium equ…

I am not familiar with "skookum choocher". Is that a technical term? Based on the context it must be a good thing.

Re: I also filed the corners off my MacBook

#190

Post by shmeeed »

edot wrote: post #125
shmeeed wrote: post #62

Earlier quoted context omitted.

I strongly recommend against using a deburring tool on a Macbook. IMO OP has picked their tools with perfect consideration. These tools are made to remove burrs resulting from machining processes. They are very useful for quick&dirty jobs on bore holes or rough edges where optics don't matter, but they lack the precision for sensitive work. Anybody who's not very well versed in using a deburring tool is just about gu…

Agreed. Deburring tools also frequently “catch” and dig in if you’re not careful. Especially on soft aluminum. Use a file if you’re going to do this.

This was posted in another comment: https://bsky.app/profile/s.ly/post/3mlo7ajrqdk2o

Not as bad as I would have thought, but I would still go OP's way if I wanted to do this.

Post reply on HN