Hacker News Board Hacker News, browsed like a classic message board
Live data from Hacker News

Flipper One Tech Specs

docs.flipper.net

Post reply on HN
Print view View original

11–20 of 182 posts

Re: Flipper One Tech Specs

#11

Post by sam_lowry_ »

jgrahamc wrote: post #6

I have a Flipper Zero and I've used it... occasionally. Like that one time controlling the Taylor Swift Eras tour wristbands: https://blog.jgc.org/2024/05/controlling-taylor-swift-eras-t... but it's mostly sat around being an odd device. I duplicated a couple of RFID things, used the IR for some stuff, and once in a while used the radio receiver, but mostly it looks pretty. I'm not sure what I'd do with a Flipper One…

Heh... I used Flipper Zero to clone RFID tags for all the neighbors to T5577 rings, pins, sticky pads and whatever not for our gated community.

If you are adventurous, many ski stations have low-tech cards as well, although they also tend to have human controllers once in a while.

And, finally, kids like running around with Flipper Zero opening power taps on Teslas.

Re: Flipper One Tech Specs

#12

Post by panki27 »

s_dev wrote: post #9

I've heard some professionally inclined RFID engineers dismiss these as mere toys and not useful compared to professional grade hardware. Perhaps some of those folk are on HN if so what are the tool sets you actually use that can be sold to the public?

Not too far from the truth. The Flipper is good as a toy, but for serious RFID things you want a proxmark 3 clone with Iceman firmware ;)

Re: Flipper One Tech Specs

#13

Post by quietsegfault »

jgrahamc wrote: post #6

I have a Flipper Zero and I've used it... occasionally. Like that one time controlling the Taylor Swift Eras tour wristbands: https://blog.jgc.org/2024/05/controlling-taylor-swift-eras-t... but it's mostly sat around being an odd device. I duplicated a couple of RFID things, used the IR for some stuff, and once in a while used the radio receiver, but mostly it looks pretty. I'm not sure what I'd do with a Flipper One…

I have done exactly the same type and amount of stuff with my flipper zero, probably in the target demo. still, no complaints! I think the one is a cool toy that I will one day (if I’m lucky) use as the perfect solution for a problem. If I can do that just once, it’ll be worth the price for me.

Re: Flipper One Tech Specs

#14

Post by maciejb »

jgrahamc wrote: post #6

I have a Flipper Zero and I've used it... occasionally. Like that one time controlling the Taylor Swift Eras tour wristbands: https://blog.jgc.org/2024/05/controlling-taylor-swift-eras-t... but it's mostly sat around being an odd device. I duplicated a couple of RFID things, used the IR for some stuff, and once in a while used the radio receiver, but mostly it looks pretty. I'm not sure what I'd do with a Flipper One…

I had plenty of fun reverse engineering a 433.92 MHz protocol curtain motors at my house use. Once that was done and I taught first my Flipper Zero, then a RPi with a C1101 to actuate the motors, the Flipper is sitting idly in the drawer.

Re: Flipper One Tech Specs

#17

Post by K0balt »

s_dev wrote: post #9

I've heard some professionally inclined RFID engineers dismiss these as mere toys and not useful compared to professional grade hardware. Perhaps some of those folk are on HN if so what are the tool sets you actually use that can be sold to the public?

RF design is very much an art, and the difference between works and works really well without harmonics and noise is a matter of design subtleties and often expensive parts. There are decent SDR setups around $500-700 that are known to be pretty good, but you have to go out of your way to buy them from the actual design houses, because despite being “identical”, the clones are not the same. In RF, the devil is in the details.

Re: Flipper One Tech Specs

#18

Post by johnwalkr »

sterlind wrote: post #4

maybe I'm blind, but it looks like there's no radio! like there's wifi and bluetooth, sure, but I don't see NFC or RFID or sub-1ghz radio, at all. imo the flipper always needed to be a software-defined transciever, with a small FPGA to drive it, like the other SDRs on the market. I'm disappointed they seem to have forsaken radio completely.

The flipper zero was already in a grey area because it easily enables one to do things in licensed bands and do things you’re not allowed to do in unlicensed bands. They can’t plausibly add even more functions in this area and still sell to the public. Presumably all of the interfaces they added are for users to add the functions under their own responsibility.

Re: Flipper One Tech Specs

#19

Post by filcuk »

janci wrote: post #3

Why put such crappy display on such a high power device?

That's pretty simple - the chosen display is best for core usage. Cleay visible in bright sun or dark, sharp angles, easy on the battery. For anything else, there's a HDMI out isn't there.

Re: Flipper One Tech Specs

#20

Post by maplant »

jgrahamc wrote: post #6

I have a Flipper Zero and I've used it... occasionally. Like that one time controlling the Taylor Swift Eras tour wristbands: https://blog.jgc.org/2024/05/controlling-taylor-swift-eras-t... but it's mostly sat around being an odd device. I duplicated a couple of RFID things, used the IR for some stuff, and once in a while used the radio receiver, but mostly it looks pretty. I'm not sure what I'd do with a Flipper One…

I plan on using it to create a backup password/2FA device... eventually
Post reply on HN