I turned a $80 RK3562 Android tablet into a Debian Linux workstation

I reverse-engineered a Doogee U10 (Rockchip RK3562) to boot Debian natively from an SD card.

No BSP, no kernel source, no vendor documentation — just a DTB extracted from the stock Android firmware and rebuilt from there.

The tablet boots Linux directly from SD without modifying internal Android storage. Remove the card and Android still boots normally.

The process is intentionally simple: write the image to an SD card from any operating system, insert it, and boot. No flashing tools, no bootloader unlocking, no custom recovery, and no permanent modifications to the device. It can even be prepared directly from Android itself using an external SD card reader.

I used Claude, Gemini, and ChatGPT heavily during bring-up for driver debugging, DT syntax, and kernel configuration issues. They accelerated development significantly, but the actual reverse engineering still required hands-on embedded Linux work: boot-chain analysis, DT bindings, panel timings, register experimentation, and kernel panic debugging.

This project also convinced me that modern mobile hardware is massively underutilized once vendor support ends. Many phones and tablets already have hardware comparable to SBCs, but simple external boot support could extend their useful life for homelabs, edge computing, local AI inference, and embedded workloads.

Any feedback, ideas, or contributions are very welcome.

I love how easy AI makes it to hack devices that otherwise wouldn't be worth the time.

> No BSP, no kernel source, no vendor documentation — just a DTB extracted from the stock Android firmware and rebuilt from there.

I know you just registered to post this, but AI generated comments are not allowed here.

The project looks very cool. Just take the time to write your own comments in your own words and it would certainly be welcomed.

The comment is good info though, what help is this reply? Why are you not watching for quality of what’s said?

I used Claude, back then when the free tier was usable, to port Linux on a obsolete, unsupported and undocumented board whose manufacturer didn't publish any info aside binary only Android images, which fortunately were enough to obtain some info.

This tickled my imagination and I wondered about a AI assisted reverse engineering platform with a complete build system in which the AI is connected to ports (serial console, gpio, i2c, spi, etc) normal physical switches (on/off, reset, etc) of the target board and a logical switch that can rotate among multiple SD cards either to the development PC and to the board so that the AI itself can download, build in parallel and test images and software freely offloading the most time consuming parts.