A link to the press release https://yasa.com/news/yasa-smashes-own-unofficial-power-dens...
> 59kW/kg At this point why don't we get rid of the k prefix and write 59W/g? Edit: I was half joking, but various answers mention kW being standard for motors, kg being the SI unit for mass etc. All true, but as used here in a combined unit, which means "power density" it still would make sense IMO. It's not like the "59" tells you that it's a strong motor and hence you want kW to compare it to other motors. You can…
Tiny electric motor can produce more than 1,000 horsepower
351–360 of 616 posts
Re: Tiny electric motor can produce more than 1,000 horsepower
#352Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio... a lot of things will automatically get better. YASA was founded in 2009, a spin out from Oxford University following the PhD of founder and still CTO, Dr Tim Woolmer. "Over the decades that followed both of these technologies were explored. But despite the potential for weight reduction, smaller…
In Bay Area that is small investment in a startup which would be able to lease a small office
>Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio...
that would help VTOL a lot. Unfortunately YASA motors are priced for supercars and availability seems to be low. Until some factory in China starts making similar ones, there are not much chances on getting hands on such a motors.
Re: Tiny electric motor can produce more than 1,000 horsepower
#353Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio... a lot of things will automatically get better. YASA was founded in 2009, a spin out from Oxford University following the PhD of founder and still CTO, Dr Tim Woolmer. "Over the decades that followed both of these technologies were explored. But despite the potential for weight reduction, smaller…
This is a negligible improvement to most things about an EV. Motors are already extremely power-dense. There is a single exception, and it's a big one. Direct-drive, wheel-hub motors are not well-regarded right now, specifically because they increase unsprung weight (the part of the car more closely coupled to the road surface than the passenger) and this impacts handling substantially. So instead we backport a bunch…
It will always be lighter to not have the motor in the wheel.
> So instead we backport a bunch of the mechanical infrastructure that transfers power from a traditional ICE engine to the four wheels.
No, we do it because it's smart and efficient for freeway-capable vehicles.
Wheels get banged up in use. They're easy to replace for different applications. They're exposed to 200 kph salt spray at hundreds of RPM. They are not a great place for motors.
Re: Tiny electric motor can produce more than 1,000 horsepower
#354Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio... a lot of things will automatically get better. YASA was founded in 2009, a spin out from Oxford University following the PhD of founder and still CTO, Dr Tim Woolmer. "Over the decades that followed both of these technologies were explored. But despite the potential for weight reduction, smaller…
> Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio... a lot of things will automatically get better. EV motors are already lightweight. The electric motor in a vehicle like a Tesla Model 3 already weighs less than you do. Reducing that one component by 75% would be a weight savings equivalent to about a half of a passenger. Not a significant effic…
Right now it takes about 10-15lbs of motor to produce a 3KW motor for an electric bike, this motor is about 10 times that in power density afaict.
The Livewire electric motorcycles use something like 100-200 lbs of motor to produce 1/4 as much power, 75kw, so that’s an improvement of 8-16x.
Re: Tiny electric motor can produce more than 1,000 horsepower
#355> It can also sustain between 350 and 400 kilowatts (469–536 horsepower) continuously, meaning it’s not just built for short bursts, as it can deliver massive power all day long. On what battery?
Re: Tiny electric motor can produce more than 1,000 horsepower
#356Earlier quoted context omitted.
> Could lead to significant efficiency gains for EV's, because 1/4 of the motor weight means better power-to-weight ratio... a lot of things will automatically get better. EV motors are already lightweight. The electric motor in a vehicle like a Tesla Model 3 already weighs less than you do. Reducing that one component by 75% would be a weight savings equivalent to about a half of a passenger. Not a significant effic…
This, or a miniaturized version thereof could change the game for light electric vehicles - imagine an electric motorcycle that weighs substantially more like an electric bicycle. Right now it takes about 10-15lbs of motor to produce a 3KW motor for an electric bike, this motor is about 10 times that in power density afaict. The Livewire electric motorcycles use something like 100-200 lbs of motor to produce 1/4 as m…
Re: Tiny electric motor can produce more than 1,000 horsepower
#357Earlier quoted context omitted.
Motorcycles I could imagine. Do e-bikes really need significantly more power than they have? They already run arguably dangerously fast for their application. Is efficiency not the primary target there?
Hmm. I am NOT an expert (though I ride and have owned 3 traditional motorcycles). IIUC, reducing unsprung weight is really crucial for handling -- which is why so-called "inverted" forks / front shock absorbers became basically the standard.
Re: Tiny electric motor can produce more than 1,000 horsepower
#358Earlier quoted context omitted.
This, or a miniaturized version thereof could change the game for light electric vehicles - imagine an electric motorcycle that weighs substantially more like an electric bicycle. Right now it takes about 10-15lbs of motor to produce a 3KW motor for an electric bike, this motor is about 10 times that in power density afaict. The Livewire electric motorcycles use something like 100-200 lbs of motor to produce 1/4 as m…
There’s no area in the world that allows e-bikes with more than 750w motors. A 3kw motor is illegal (cf Surron), unless you are talking about an e-moped requiring registration.
Re: Tiny electric motor can produce more than 1,000 horsepower
#359Earlier quoted context omitted.
Yes, I agree. I was careful about how I worded this to avoid saying anything about the motors actually being in the wheels for this reason. Although, I guess at some point in the future if we can get the weight down low enough and the strength of the motor high enough we could replace the existing braking system with a motor for the same weight penalty we already pay. In an ideal world all the energy from breaking wo…
Deceleration requirements are going to be harder than acceleration, one would think so how would you apply full brakes with the same motor?
EDIT: Quick maths show that decelerating at 1g (basically what the best sport tires can do) in a 2000kg car at 300kph requires absorbing ~1500kw, so conveniently two of these motors.
Re: Tiny electric motor can produce more than 1,000 horsepower
#360Earlier quoted context omitted.
This, or a miniaturized version thereof could change the game for light electric vehicles - imagine an electric motorcycle that weighs substantially more like an electric bicycle. Right now it takes about 10-15lbs of motor to produce a 3KW motor for an electric bike, this motor is about 10 times that in power density afaict. The Livewire electric motorcycles use something like 100-200 lbs of motor to produce 1/4 as m…
There’s no area in the world that allows e-bikes with more than 750w motors. A 3kw motor is illegal (cf Surron), unless you are talking about an e-moped requiring registration.
Now hold my beer...