Earlier quoted context omitted.
Or move the moon closer.
That sounds even more plausible.
I maintain a 17 year old ThinkPad
271–280 of 595 posts
Re: I maintain a 17 year old ThinkPad
#272Works great. Stuck on Catalina, but can handle the software I need.
Re: I maintain a 17 year old ThinkPad
#273Earlier quoted context omitted.
Until you're able to somehow transplant a T420 keyboard into a Framework, I'm staying on my ThinkPad either until it dies, or the heat death of the universe. whichever comes first ;-)
Similar situation here, with W520. My fantasy for Framework 16 is to have extended hinges and thick bezel available that would lift the screen further from the keyboard deck, and of course an upgraded keyboard available with longer travel and contoured keys (and better arrow key layout). Are you listening, Nirav? (Yes, I know it would make the laptop slightly thicker and heavier. But I just said I'm using a W520, and…
Re: I maintain a 17 year old ThinkPad
#274Earlier quoted context omitted.
That sounds even more plausible.
Wasn't there at least one movie, where that was not a good thing?
But yeah, it would not be a good thing, according to the movie at least.
Re: I maintain a 17 year old ThinkPad
#275Earlier quoted context omitted.
- FW13 has no video output, except as a USB adapter - FW13 has no audio outputs, except as USB sound card That was a conscious design decision, as you're supposed to use swappable expansion cards. Other things X60T has, but FW13 doesn't: - Fingerprint reader https://frame.work/pl/en/products/fingerprint-reader-kit?v=F... - SD card slot https://frame.work/pl/en/products/sd-expansion-card
> - Fingerprint reader My mistake. > That was a conscious design decision, as you're supposed to use swappable expansion cards. > - SD card slot Like I said. The laptop itself is very basic (crippleware by Lenovo standards). You have to use USB ports for everything, there are only 3 usable, and also mechanically very weak, not to mention performance, heat inside a closed plastic case, cost, etc.
I keep telling myself I should try an X230T and Linux --- if there was a Framework device which supported Wacom EMR, I wouldn't have to. That said, my next major tech purchase is an rPi 5 and a Wacom Movink 13.
Re: I maintain a 17 year old ThinkPad
#276It weighs less than 2kg and is perfect for light duties.
Re: I maintain a 17 year old ThinkPad
#277I run NixOS on a coreboot-ed T420 and I absolutely love everything on the outside, but it really shows its age when compared to the display on my Macbook or it comes to running heavier software ie. rust-analyzer, Chrome, or Nix builds. If Lenovo were to release a modern T420-like, with identical chassis, battery system and similar IO port variety, but a modern display, modern internals (replaceable SSD! soldered RAM…
Doesn't NixOS hog on your hardware?
Re: I maintain a 17 year old ThinkPad
#278Earlier quoted context omitted.
When would you define as “before”? I’ve had a thinkpad on and off and I’d describe the quality as consistent. People talking about old Lenovos being good quality are often talking about in the pre-IBM days which is far more likely to be nostalgia at this point.
I have a T420. A few years ago I switched to a slightly used T480, keyboard was a huge downgrade and the whole series can get really stupid USBC issues. After half a year or so it didn't dock anymore and I got an X1, basically the same laptop glad I found it without touch and the 'bright screen' because the screen is barely good enough, keyboard is the same and USBc already started to get finicky. Meanwhile my T420 s…
I’ve wanted to get a T480 for a while now (mainly to do a T25 frankenpad [1] – seems like a nice project), but if it really has those issues with the USB-C ports, I think I’ll pass :-(
Re: I maintain a 17 year old ThinkPad
#279Earlier quoted context omitted.
If being able to replace a part requires me to have a screwdriver (literally a Philips one should do), the component, and no additional PhD or bravery coming from youth, inexperience or both, I will welcome it with open arms. Right now, having devices which require both expertise and expensive machinery means that the cost of going to someone to repair it will increase over 10 folds, making a full replacement a finan…
> If being able to replace a part requires me to have a screwdriver (literally a Philips one should do), the component, and no additional PhD or bravery coming from youth, inexperience or both, I will welcome it with open arms. You have to understand though that people like us are a tiny minority. Increasingly I hate creating waste, especially e-waste, and so I'll tinker with things to get them working or upgrade the…
Anyone that can read and use their brain can strip a laptop down to components and reassemble it.
Re: I maintain a 17 year old ThinkPad
#280I wish that Framework could attain the same lofty levels of "second hand market success" that ThinkPads enjoy. A lot of the "Thinkpad fans" I've talked to genuinely want them, or respect them for similar reasons they enjoy the ThinkPad legacy. ThinkPads are durable but every day they get older, slower and more difficult to source parts for as collectors entrench themselves and the requirements of operating systems (a…
Framework’s offerings are interesting, but after having gotten used to the solid rigidity of M-series MacBooks and X1 series Thinkpads, the level of flex in the Framework 13 is a major issue for me. It’s difficult to justify for the price, plus PCBs and repeated flex stress don’t mix nicely. I think it’s time for either Framework or a third party partner to sell a new chassis that’s compatible with the FW13’s mainboa…