Earlier quoted context omitted.
I don’t know about economical but there are devices that sense current flow in a line without a tap, just from the EM fields. People with wood shops use these to automatically turn on the dust collection system when any power tool is turned on. Between small production sizes and the relay there are probably cheaper DIY solutions. OP is just using a smart plug, so no real electronics involved.
These clamp on systems may not work too well on North American 240V circuits like a dryer since the emf will cancel, no? You have two 120V feeds exactly 180 degrees out of phase with eachother. Unless you unravel the wires a bit and just clamp a single conductor. Or maybe I have this all wrong.
Is It Dry Yet?
141–147 of 147 posts
Re: Is It Dry Yet?
#142Not to knock other people's hobbies, but our dryer plays a loud jingle when done, no Internet connection required. Do other models not have this feature?
The thing that I am not sure of is why it's so important to know when the dryer finishes? And if it's that important how does it slip your mind that the 45 dryer cycle started at the top of the hour? Is it a kids thing?
I want to build something like this that reminds me many times that I need to switch the laundry.
Re: Is It Dry Yet?
#143Not to knock other people's hobbies, but our dryer plays a loud jingle when done, no Internet connection required. Do other models not have this feature?
Re: Is It Dry Yet?
#144Earlier quoted context omitted.
Into the house, clearly. Hopefully their air conditioning removes humidity too.
Ventless driers typically use a condenser to pull out the humidity, condense it into water, and drain it into the same drain your washer uses. If it's working correctly, the humidity shouldn't be going into the air.
Re: Is It Dry Yet?
#145Earlier quoted context omitted.
Ventless driers typically use a condenser to pull out the humidity, condense it into water, and drain it into the same drain your washer uses. If it's working correctly, the humidity shouldn't be going into the air.
Cool, I learned something. But it also does seem like that would take additional energy(due to the particularly high enthalpy of water, if I remember my concepts correctly) so at least where I am, venting the excess moisture is the most expedient method.
Re: Is It Dry Yet?
#146Earlier quoted context omitted.
All 3.8MB of the cover image are appreciated by me :)
There are two cover images on the page, for 8.3MB total. It's pretty wild.
Re: Is It Dry Yet?
#147Earlier quoted context omitted.
Into the house, clearly. Hopefully their air conditioning removes humidity too.
Ventless driers typically use a condenser to pull out the humidity, condense it into water, and drain it into the same drain your washer uses. If it's working correctly, the humidity shouldn't be going into the air.