91–100 of 335 posts
I've never done anything other than breathe on them and polish with the bottom of my shirt. What am I missing?
I miss actual glass, uncoated lenses.
The best method I’ve found so far: 1. Get your glasses wet with warm water. 2. Apply dish soap to both lenses. 3. Gently rub the soapy water over the lenses. For some stubborn things (like sunscreen) in the edges I sometimes gently use a Q-tip. 4. Rinse under warm water. Gently rub with your fingers to agitate the soapy water and help rinse it off. 5. (This is the important step) Adjust the faucet’s flow to a low lam…
This is the exact thing I do as well. I have also found that rinsing with hot water helps tiny droplets evaporate quickly without (for some reason? Clean water at home?) leaving drying stains.
My main concern is that the more effective soap may damage coatings. In practise, however, it seems that she has to change lenses often enough that damaged coating does not have time to become a big issue. (This is partially due to how pregnancy and breastfeeding changes the eyes -- we'll see how things go after this.)
The best method I’ve found so far: 1. Get your glasses wet with warm water. 2. Apply dish soap to both lenses. 3. Gently rub the soapy water over the lenses. For some stubborn things (like sunscreen) in the edges I sometimes gently use a Q-tip. 4. Rinse under warm water. Gently rub with your fingers to agitate the soapy water and help rinse it off. 5. (This is the important step) Adjust the faucet’s flow to a low lam…
https://www.amazon.com/Zeiss-Pre-Moistened-Cleaning-Wipes-Co...
If they are especially dirty, I'll rinse them with clean water and maybe a bit of soap first.
The best method I’ve found so far: 1. Get your glasses wet with warm water. 2. Apply dish soap to both lenses. 3. Gently rub the soapy water over the lenses. For some stubborn things (like sunscreen) in the edges I sometimes gently use a Q-tip. 4. Rinse under warm water. Gently rub with your fingers to agitate the soapy water and help rinse it off. 5. (This is the important step) Adjust the faucet’s flow to a low lam…
- Wash with cold water. Warm or hot water might ruin the coating. (Our water comes supercooled right out of the tap in the winter,so in order to not have my hands instantly frozen into a solid block of ice I go for 15—20 degrees or so.)
- Use a drop of mild dish soap without ammonia.
- Dry them with a soft clean cloth (they use microfiber I think, I just use a random soft towel that doesn't give off any lint/dust)
Doesn't have to be more complicated than that. It takes 20 seconds and my glasses are as good as new.
The best method I’ve found so far: 1. Get your glasses wet with warm water. 2. Apply dish soap to both lenses. 3. Gently rub the soapy water over the lenses. For some stubborn things (like sunscreen) in the edges I sometimes gently use a Q-tip. 4. Rinse under warm water. Gently rub with your fingers to agitate the soapy water and help rinse it off. 5. (This is the important step) Adjust the faucet’s flow to a low lam…
Earlier quoted context omitted.
Yeah, I spend £300+ per pair on not having coke bottle thick glasses that are thin and light, and made out of polycarb.
Paying more can get you thinner lenses? This is of interest to me as I do have coke bottle-thick glasses.
Look for "high (refractive) index" lenses. It bends light further, so you need less material / less angular difference to get the same effect.
Earlier quoted context omitted.
A good chunk of people require glasses that need to be custom-made. Once you also add amenities like photochromic lenses, it quickly adds up.
> A good chunk of people require glasses that need to be custom-made. Zenni makes their glasses to order; what do you mean?
I used to always go with Costco, but last year I tried Zenni. The frames are definitely flimsier than any others I've had, which I've heard is generally the case for their wire-frame options—I'm sure their heavy plastic frames are more sturdy, but that's not my style. But the lenses seem as good as usual. Except they polished the edges of the lens instead of leaving them frosted, which creates distracting reflections under certain light (with an Rx of around -9/-10 my lenses are 7-8 mm thick). Despite all that I'll probably stick with Zenni in future.
I wash my glasses with a drop of palmolive dish soap and warm water, then blow any water drops off the lenses. An oelophilic coating (available with Zenni) makes this easy, because the water beads up and almost rolls off.
The best method I’ve found so far: 1. Get your glasses wet with warm water. 2. Apply dish soap to both lenses. 3. Gently rub the soapy water over the lenses. For some stubborn things (like sunscreen) in the edges I sometimes gently use a Q-tip. 4. Rinse under warm water. Gently rub with your fingers to agitate the soapy water and help rinse it off. 5. (This is the important step) Adjust the faucet’s flow to a low lam…
The best method I've found so far (I've worn glasses for over four decades): https://www.amazon.com/Zeiss-Pre-Moistened-Cleaning-Wipes-Co... If they are especially dirty, I'll rinse them with clean water and maybe a bit of soap first.
I just use some IPA and a microfiber cloth. Man, I've so many better things to do with my time on the planet than cleaning my specs.