71–80 of 216 posts
Earlier quoted context omitted.
Your last paragraph is exactly the reason I enjoy being a ham (it's not an acronym, BTW). I get to tinker and constantly stretch my knowledge and technical skills.
I've always hated the "HAM" moniker and have always been pedantic about referring to it as "amateur radio."
I saw this shared on Twitter this morning, and had some thoughts: While the graph is good, it is specific to the US and ignores the fact that a large amount of the amateur population is 50+ - the hobby is healthy now, but there's an age crisis coming soon. It doesn't really reflect the health of the entire hobby, globally, just a specific subset. Millenials aren't young any more, I'm millenial and I've held a ham lic…
But my local ham club was the most helpful, open, and interested group of people. Yes, they are mostly 65+ and some quite old, but they are doing new and interesting things, including many of the digital modes like the ones listed in the article. There is a group of about 5 of them, nicknamed the QRSS Mafia. They are using ultra low power (200mw and frequently less) to send signals to the opposite side of the planet. One of them was recieved 2500 miles away (New Mexico to Florida) on 8.5 microwatts. At the time it was the recorded world record for distance/power (on the planet, communicating with voyager 1 doesn't count.)
Earlier quoted context omitted.
> a large amount of the amateur population is 50+ Yes, and a lot of these folks take a "get off my lawn" approach to anything that's different to how amateur radio has been done for the last 50 years. Try talking up metro-wide mesh data network or using packet radio for anything other than APRS you get the "Why would you want to do that?" Once upon a time amateur radio operators MADE their own equipment: it was the m…
There's also more than a fair share of OM spouting off about their gout, dieabeetus, negroes, and Jeezus. Phone frequencies are a real cesspool most of the time.
Extra class licensee here. On phone (Single Sideband "SSB" or FM typically, for those not familiar with the terminology, where you use radio for voice rather than data/Morse) I've heard all kinds of absolutely reprehensible things. In one single conversation where a man was ranting about mask mandates, he managed to throw in derogatory use of the word "retarded," toxic masculinity insults, homophobia (including equating it to bestiality), racist innuendo, and even a call to arms to kill our governor if they wouldn't stop this mask mandate. Myself and others tried to temper the conversation and return to civility, but they wouldn't have it. It's one thing when people say these things in two-way conversations on HF, with lots of frequencies available to change to if you don't like what you hear. It's another when it's on the local FM repeater with a single frequency shared by thousands of people.
In order for amateur radio to thrive, it needs to be a welcoming and inclusive place to everyone. Young scouts - children! - of all genders, races, and backgrounds are learning ham radio and tuning into their local repeaters or working HF. I can't imagine what they or their parents thought if they happened to be listening in at that moment. Hams need to all be good to each other, and keep the negativity, insults, bigotry, and politics for your social media pages. Let's get back to talking about propagation, antennas, RFI in the shack, debating FT8, doing emergency prep, or even just discussing the weather.
Earlier quoted context omitted.
> a large amount of the amateur population is 50+ Yes, and a lot of these folks take a "get off my lawn" approach to anything that's different to how amateur radio has been done for the last 50 years. Try talking up metro-wide mesh data network or using packet radio for anything other than APRS you get the "Why would you want to do that?" Once upon a time amateur radio operators MADE their own equipment: it was the m…
I feel like I am lucky, my club has a bunch of old dudes, but they are still learning and growing. A few years ago, I proposed adding a digital repeater, and it caused all kinds of trouble, but most of those folks left and now its great. We have awesome presentations on how to leverage raspberry pis, building portable battery packs, opensource VNAs, etc. But this is true, a lot of the hobby is very curmudgeon-y. Whic…
A lot of people invested considerable effort into obtaining knowledge.
Once obtained, they were free to coast. I take it there's no true continuing ed requirement to maintain a license?
Now, protocol / technical change threatens to render all their existing knowledge outdated. And furthermore, require additional effort.
Unsurprisingly, they're resistant. Said without malice, because that's just human nature.
Continuing ed requirements are usually a gimmick or BS, but in this case it seems like they might be healthy for the hobby. Demonstrating growth / trying new things? A nice process to gently nudge those not still actively learning back into the lower classes.
Earlier quoted context omitted.
>You can definitely do that for the 2 and .75 meter bands. $30 off of Amazon for a BaoFeng. I'm welcome to being corrected, however my understanding is that I'd need a full license to legally broadcast on those bands.
Ah, sorry! I misunderstood what you meant. You are correct. You're likely aware that you can get CB/MURS/FRS type radios without a license, but that wouldn't help that much. It would be nice to have a small slice of each ham band that would be available to non-licensed folks, but the hardware would be tricky, you'd have high physical capability (and cost) but it would have to be locked down to basically a 'slice sele…
And avoid all the test questions about amplifiers, and antenna configuration, etc.
The other month in Canada we had a huge outage of 3-4 cellular service providers and home internet issues due to a MPLS failure. Being work from home due to COVID I had no idea how to determine if this was a local level event, or a larger event. I turned on my trusty AM/FM/LW/SW radio. However in the fashion of today's radio landscape they're all multicast of national programming etc. Nothing about a huge outage.
Had I a license there are a few HAM guys I know 60 minutes down the road and it would have been a decent check to see the severity of the outage.
When I first read about FT8, I immediately started looking at the code to see how simple it would be to handle more meaningful conversations. Fortunately I stumbled onto this video from Jordan Sherer: https://youtu.be/mZKhVcFOljY He had done all the work for me in JS8Call: https://bitbucket.org/widefido/js8call/ If you want to skip the video, the design document gives a nice overview of the protocol: https://github.c…
Glad you found me :) Here's the main site where you can learn more: http://js8call.com/ And a video walkthrough I did just a few months ago: https://www.youtube.com/watch?v=rz0Cpkaol-o
https://miscdotgeek.com/qrp-saving-ham-radio/
if anyone cares to read it.
As someone who has looked on into the hobby in Canada. I feel there needs to be another class for people who just want to use a store bought radio. I have to take time to study an exam about how increasing x changes y, and all these other fun facts about radio equipment. However the draw for me is talking to people, not building radio equipment. Just my two cents.
If the draw is just talking to people, you may be very disappointed. Unless you are the specific target demographic for 2m repeater crowd or the "broadcasters" in the HF, you will be shunned at best. But hey, you may be entertained by hearing old farts complain about immigrants!
I agree, that today it likely is a monoculture of older people who really like radio equipment.
Someone help me understand what is the exciting thing about HAM cause this article doesn't do anything for that. My first exposure to HAM was back in ~2000 when I started working at a car stereo shop and the owner (NU5K) was huge into HAM. He was an asshole most of the time, but very knowledgeable and loved to tinker with different HAM components both benchtop and mobile. Everytime I would try and get interested the…
>Ok, well I can also do that on ukraine.bbs - and being able to choose my topic instead of whomever is actually on this random band at this random time. I think this is one of the big advantages of amateur radio. No need for the infrastructure of the internet...it's just you with some TX/RX equipment, power, and someone else with the same. No ISPs, governments, servers, software, etc... getting in the way.
Someone help me understand what is the exciting thing about HAM cause this article doesn't do anything for that. My first exposure to HAM was back in ~2000 when I started working at a car stereo shop and the owner (NU5K) was huge into HAM. He was an asshole most of the time, but very knowledgeable and loved to tinker with different HAM components both benchtop and mobile. Everytime I would try and get interested the…
It's pretty much the only way for a person to legally build a radio and operate it. Everything you're talking about has to do with using communications equipment, not creating anything.