Am I missing something here, but if there is a bug in how they calculate bars shouldn't it apply equally in all the cases. for example, if signal == some-weak-signal, then bars = 5 then, if signal == some-weak-signal - 1 (for example), then shouldn't bars = 4 instead of bars = 0 (or 1). This seems like horseshit to me. Though it seems people are buying this explanation, so as far is Apple is concerned, it worked.
Apple letter about iPhone 4
91–100 of 145 posts
Re: Apple letter about iPhone 4
#92Earlier quoted context omitted.
Steve Jobs always writes colloquially. I can see that trickling down.
Sure. But, in my opinion at least, his "Thoughts on Flash" seemed much more carefully worded than this. Everyone refers to signal strength as the quantity of "bars" they have, so I suppose this is the colloquial way to write this. But sentences like "Their big drop in bars is because their high bars were never real in the first place." just boggles my mind that it made it through Apple PR. This is the same company th…
Re: Apple letter about iPhone 4
#93does not jive with my own exp using android, RIM, and Nokia..
Re: Apple letter about iPhone 4
#94It seems like Apple solved a "perceived" problem with their phone (it is probably a problem with all phones, but never so heavily publicized like for the iPhone4) by fixing the the source of that perception. Clever. But the solution doesn't really address the real complaint -- that holding the phone in some ways seemed to change the number of bars shown. It seems like overall the bars display will be conservative now…
So the fix is to make what was fake before, more accurate.
Source (from Gruber): http://fscked.co.uk/post/754590440/this-infographic-hopefull...
Re: Apple letter about iPhone 4
#95So you're also telling me that my 3G reception is actually worse then I had previous thought? All those places I get 4 bars are really 2? I guess this explains why I often got dropped calls when I have "full reception". Wonder why they didn't mention the proximity problem. From what I have heard that's actually more annoying then the signal issue.
Re: Apple letter about iPhone 4
#96Am I missing something here, but if there is a bug in how they calculate bars shouldn't it apply equally in all the cases. for example, if signal == some-weak-signal, then bars = 5 then, if signal == some-weak-signal - 1 (for example), then shouldn't bars = 4 instead of bars = 0 (or 1). This seems like horseshit to me. Though it seems people are buying this explanation, so as far is Apple is concerned, it worked.
A 30 dB drop can both not change how many bars are displayed at all or get you down to no bars at all. If you have a signal strength between -51 dB and -61 dB and the signal drops 30 dB five bars will still be displayed. If you have a signal strength between -83 dB and -91 dB and the signal drops 30 dB you go all the way from five bars to zero bars.
What AnandTech found seems consistent with what Apple writes. More or less, at least. The drop in signal strength when holding the phone is a bit larger than with other phones (and previous iPhones), but not dramatically so. That’s the only thing Apple is still quiet about.
Re: Apple letter about iPhone 4
#97This doesn't seem to jive with AnandTech's testing which ignored the bars completely and installed some software to read the signal strength directly. Their conclusion was that the iPhone 4 had better reception overall than the 3GS for various reasons, (a fact which Apple seem to be clinging to like a life raft) but that the external antennae was still faulty even when held "normally" and if fixed would make a major…
It seemed to me to actually jive with AnandTech's testing, and with user experience with the holding problem occurring in already weak signal areas. To wit many report that they only have the full drop in some places. As for holding the phone, I'm not so troubled by the antennae, could it be better, yes, but is it that terrible, doesn't seem so.
However, in locales that have less signal, but where iOS
still displays 5 bars, the drop of 24 dB is visualized
much differently. For example, at another test location,
signal without holding the phone is -89 dBm, which is
still displayed as 5 bars. Cup the phone, and you'll fall
all the way to -113 dBm. All the bars dramatically
disappear one after the other, people think they've
dramatically lost all the signal, and you know the rest...
http://www.anandtech.com/show/3794/the-iphone-4-review/2Re: Apple letter about iPhone 4
#98Apple is now placing the blame on AT&T by saying that the problem is actually low bars (i.e. the network).
Brilliant way to shift the blame.
Re: Apple letter about iPhone 4
#99Earlier quoted context omitted.
Anand doesn't mention it explicitly, and neither do you, but I'm assuming that signal to noise ratio drops when you short the iPhone 4 antennae too otherwise his conclusion doesn't make sense: "At the end of the day, Apple should add an insulative coating to the stainless steel band, or subsidize bumper cases. It's that simple."
The problem is that Anandtech's conclusion is out of place with the rest of their article, even if you take into consideration the shorting of the antennae. The iPhone 4 loses 24.6dB of signal strength when cupped at the bottom vs 17.7dB for the Nexus one. If Apple should be required to add an insulative coating to the stainless steel, then shouldn't Google also be required to make their phone thicker (or make other…
Re: Apple letter about iPhone 4
#100I actually believe them. I can't recall ever seeing my iPhone report 2 or 3 bars -- it's always a very low or very high signal indication. And yet, so many times I've gotten bad performances at "full signal"...