Live data from Hacker News

Odroid-H3

hardkernel.com

81–90 of 120 posts

Re: Odroid-H3

#81

Word of caution to anyone thinking of using this for pfsense: the realtek 2.5G drivers are not included in the pfsense image and have to be installed manually. A real pain if you don't have easy access to another freebsd machine.

Should work in OPNsense

Re: Odroid-H3

#82
post #74

I wish they would have up to eight at 6 to 8 SATA ports. Then it could be a proper nass.

I've seen some pci-e m.2 5x sata boards. That would get you to 7 ports. You can boot from emmc (i assume) if you don't want to boot from your array.

I use such board, chip is JMB582. You need custom heatsink on it, but it works. And yes, boots from eMMC.

Re: Odroid-H3

#83

Earlier quoted context omitted.

Search where? Because I can only find them for 350€+

The top of the pi thread has this one: (16G ram, dual nic, 512G ssd) for $190 right now. https://www.amazon.com/Processor-Beelink-Computer-Support-Di... If you lower the ram/ssd you can find them for $120 or so, some also have the dual 2.5G adapters, and as the link up thread shows its possible for ~200 to even get them with 4+ 2.5G links. Granted a lot of these are "deals" rather than MSRP, but right now the "deals"…

It says $279 for the one you linked.

Re: Odroid-H3

#84

This looks like a great chance to ask: Besides the ODROID-Hn series, what other single-board computers have dual ethernet? Very few, AFAICT. For router use-case, the alternatives suggested (buy an older NUC, for instance) don't work.

Look around at STH forums. There are a bunch of jasperlake products with 4x or 6x 2.5 Gbe. This is one such seller: www.loksing.com.cn . You can also find them on aliexpress.

Nice recommendation. An example I found is barebones N5105 system with 4x 2.5 Gbe for ~$163 shipped. [1] I could source 16GB (2x8GB) DDR4 SO-DIMM (using dual-channel is important) and 512GB M.2 NVMe for about $100 additional.

  1: https://www.aliexpress.com/item/1005003744743799.html

Re: Odroid-H3

#85

Word of caution to anyone thinking of using this for pfsense: the realtek 2.5G drivers are not included in the pfsense image and have to be installed manually. A real pain if you don't have easy access to another freebsd machine.

In my experience Realtek network cards often leave a lot to be desired when used in a routing / firewalling / always on environment. I specifically make sure NICs are Intel based when configuring systems.

Re: Odroid-H3

#86
post #60

Earlier quoted context omitted.

Can you provide some references (to production products)? I couldn't find any STH brand.

Just look for the small router/switch looking pics with 4 or 6 ports on the front: https://www.servethehome.com/category/networking/ They review half a dozen of them or so. Most with the N4000, N5000, and N6000 under $200.

Specifically, here's their review of a couple of N5105 based ones (which are probably the most sensible choice for most applications). [1][2] TLDR: KingNovy and Topton from AliExpress are pretty good and going barebones is a better deal.

  1: https://www.servethehome.com/two-fanless-intel-celeron-n5105-4x-2-5gbe-options-reviewed/
  2: https://www.youtube.com/watch?v=rUuaAPG0PxU

Re: Odroid-H3

#88
Hardkernel folks make some pretty amazing products. My home server is built on top of Odroid-HC2 coupled with a 3.5” HDD, and I feel that was some of the best $70 I ever spent. The whole thing is tiny, fanless, and it only consumes 2 Wh on average. I only wish it had hardware video encoding capabilities.

Re: Odroid-H3

#89
post #60

Earlier quoted context omitted.

Just look for the small router/switch looking pics with 4 or 6 ports on the front: https://www.servethehome.com/category/networking/ They review half a dozen of them or so. Most with the N4000, N5000, and N6000 under $200.

Specifically, here's their review of a couple of N5105 based ones (which are probably the most sensible choice for most applications). [1][2] TLDR: KingNovy and Topton from AliExpress are pretty good and going barebones is a better deal. 1: https://www.servethehome.com/two-fanless-intel-celeron-n5105-4x-2-5gbe-options-reviewed/ 2: https://www.youtube.com/watch?v=rUuaAPG0PxU

I don't really understand why that means the Odroid-H3 is a "tough sell", though. It's quite a bit cheaper than both of the boards mentioned in that review, even after you add a case and power supply.

Re: Odroid-H3

#90

Oh boy. I'd buy this instantly if it was AMD. Is there comparable alternative which uses AMD CPU?

The ultra low power Intel (N5XXX and N6XXX) are by far the best x86 CPUs per watt right now.

The n6005 on the H3+ could easily handle 3-4+ 4K encodes as a media server with the eGPU too.

It's pretty much my ideal hardware for that use case so I'm probably in for one.

Post reply on HN