But nothing that looks like an antenna. Any idea where that might be?
Edit: as lovelearning pointed out, there is a small ceramic-looking piece in the upper-left of the top side, near the GPIO pins and LVDS display connector. That might be it.
41–50 of 218 posts
But nothing that looks like an antenna. Any idea where that might be?
Edit: as lovelearning pointed out, there is a small ceramic-looking piece in the upper-left of the top side, near the GPIO pins and LVDS display connector. That might be it.
From the FAQ: > there are no immediate plans to release any more new models. A further new model may be released in 2-3 years, but this is not a firm schedule.
I'll be picking one up. Onboard WiFi is a big deal.
Couldn't you already just plug a fairly cheap USB dongle in your rasperry pi ? I'm not sure I see what the big deal is, aside from probably making the price cheaper and freeing up a usb slot
Raspberry Pi with built in wireless comms means it uses a standard piece of hardware so the software stack can be configured to work out of the box. That can't happen with the existing arrangement. Also the power supply problems with original Pis are frustrating to say the least. These are most evident when plugging in USB wifi devices. Again having a standard integrated piece of hardware will (hopefully) avoid this.
Why does Raspberry Pi not need to conform to the new "standards" of the FCC that require locking down firmware in routers? If it has onboard wifi, and you can turn it into a router... what's the difference between someone installing OpenWRT on a raspi vs. installing OpenWRT on a TPLink? edit: This is a legitimate question, not an opinion.
Update: Just noticed the radio testing report says single PCB mounted chip ceramic. I still can't spot it with certainty.
Why does Raspberry Pi not need to conform to the new "standards" of the FCC that require locking down firmware in routers? If it has onboard wifi, and you can turn it into a router... what's the difference between someone installing OpenWRT on a raspi vs. installing OpenWRT on a TPLink? edit: This is a legitimate question, not an opinion.
Comparing the photos to my Pi 2, it doesn't seem very different. There's an extra IC near the microsd card, a connector beneath the HDMI port, and a few other small changes. But nothing that looks like an antenna. Any idea where that might be? Edit: as lovelearning pointed out, there is a small ceramic-looking piece in the upper-left of the top side, near the GPIO pins and LVDS display connector. That might be it.
Why does Raspberry Pi not need to conform to the new "standards" of the FCC that require locking down firmware in routers? If it has onboard wifi, and you can turn it into a router... what's the difference between someone installing OpenWRT on a raspi vs. installing OpenWRT on a TPLink? edit: This is a legitimate question, not an opinion.