Repairing a vintage 40-kilovolt xenon lamp igniter
1–10 of 11 posts
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#2[deleted]
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#3A similar circuit is in every plasma cutter.[1] For the same reason; you need a high voltage pulse to ionize the working gas (usually air) and start the arc.
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#4Also see CuriousMarc's companion video, which shows how the spark gap works with a coherer for primitive radio transmissions. https://www.youtube.com/watch?v=9zG_DlxyugQ
reply
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#5A similar circuit is in every plasma cutter.[1] For the same reason; you need a high voltage pulse to ionize the working gas (usually air) and start the arc. [1] https://guelphweddingshop.blogspot.com/
If you used xenon as the working gas in a plasma cutter, would you essentially have a xenon arc lamp?
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#6A similar circuit is in every plasma cutter.[1] For the same reason; you need a high voltage pulse to ionize the working gas (usually air) and start the arc. [1] https://guelphweddingshop.blogspot.com/
And tig welders that can do AC.
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#7Excerpts:
"So where is the spark gap in this unit? It turns out to be the ceramic cylinder. I opened up the cylinder and found a stack of eight metal disks with (maybe) carbon electrodes in the center. The disks are separated by mica washers to leave 0.33 mm gaps between each pair. This forms a series of 7 tiny spark gaps.
This type of spark gap is known as a "quenched spark gap". Spark gap transmitters were the first form of radio transmitter, used from 1887 to 1920. They used a spark to transmit Morse code via radio waves (details). The quenched spark gap was one type of spark gap used in these transmitters, as shown in the diagram below.
By combining multiple small gaps, the quenched spark gap could cool off efficiently."
[...]
"Spark gaps generate radio waves across a wide spectrum; inventor David Hughes first noticed this interference in 1878."
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#8A similar circuit is in every plasma cutter.[1] For the same reason; you need a high voltage pulse to ionize the working gas (usually air) and start the arc. [1] https://guelphweddingshop.blogspot.com/
If you used xenon as the working gas in a plasma cutter, would you essentially have a xenon arc lamp?
Yes.[1]
[1] https://youtu.be/qUutgYBqSoI
(I miss the days of TechShop, when I had access to tools like that.)
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#9That schematic of a Tesla coil is the same as a spark-gap transmitter, except of course the latter is designed to emit as much as possible and has an antenna connected where the output torus would be; see page 375 of this excellent book: https://archive.org/details/principlesunderl00unit
(Although very old, that book is great at explaining the basics of what radio actually is.)
Re: Repairing a vintage 40-kilovolt xenon lamp igniter
#10Earlier quoted context omitted.
If you used xenon as the working gas in a plasma cutter, would you essentially have a xenon arc lamp?
Yes.[1] [1] https://youtu.be/qUutgYBqSoI (I miss the days of TechShop, when I had access to tools like that.)
I miss TechShop, too. If making is your passion theres good news: it isn't dead. Current virus issue excluded there are many smaller maker spaces you can join in the bay.